Detect Rapid Water Heater Leaks

Any device failure can happen at any time. A water heater leak is a malfunction that can happen when you least expect it. To be able to quickly detect a leaking water heater fault, you need to install a Floodmaster.

Water heater leaks can happen suddenly and when you are not at home. This leak can cause more material damage if you have gone on vacation and are away from home for several days. If the leak is large, material damage can be done in just a few minutes. That is why you need to avoid this possibility of risk. You can do this very easily by installing a detector on your water heater that will activate an alarm and an automatic shut-off system. This will help you minimize the damage that can occur from such a failure.

Installation of this detector is very simple. You will need to install the Floodmaster on the supply line of the water heater and place the sensor block in a container that will sit on the floor near the drain pipe of the pressure relief valve. You can also place it in a position where there is a possibility that water will appear first if there is a leak. When this sensor detects a water leak, it will automatically close the supply valve and activate an alarm to notify you of the malfunction.

To prevent property damage that can result from a leaking water heater, be sure to obtain a Floodmaster and install it according to the instructions provided. This will help you to always be sure that you have secured your home from unwanted property damage.